After applying a complete plaster layer to a part of the walls determined by the guides, the guide of the rails is removed and filled, along which the plaster of certain parts of the wall is carried out. After removing the guide rails, filling and grouting the formed channels between different plastered areas. One of the disadvantages of warm plaster is the low protective ability of warm plaster from moisture and other external factors.
Warm plaster refers to insulation materials, which in turn need a certain protection against moisture and water. Therefore, after the plaster of the walls of the facade of the building, the surface must be finished with a protective layer of the finish waterproof plaster. As a protective finishing of the walls of the walls of plastered warm plaster, you can use solutions of finish plaster, which are used for plastering on the wall decoration of insulated polyvinyl chloride insulation bags.
The plaster layer of the starting and finish plaster is applied to the surface of warm plaster in the usual way to spread the solution. Each layer of starting and finishing plaster should not exceed the thickness of 2-3 mm. For each layer of starting and finishing plaster, the surface is cleaned and grout. For cleaning and grinding the surface of the plaster, sandpaper is used. After the stucco layer is completely dry, finishing the walls is made with colorful decorative solutions.