In the event that there is no way to connect to the central water supply, then the well is drilled. There are almost no differences: water can be connected to all household appliances that requires this. But, there is still one small difference: after some time, the well can be polluted, and this leads to a decrease in pressure or even to the residual termination of the water supply. If the water began to go with the air and you can see it in it – this is the first signal of pollution. How to clean the well with your own hands? Of course, the best and best way to clean the well will be a calling the master, as he will do the work using specially designed equipment, which guarantees quality and reliability. But if, nevertheless, the well will need to be cleaned with your own hands, then there are several ways for this. First – you need to purchase an air compressor that joins the vacuum cork (it should be done on the well pipe before starting work) and, under powerful air pressure, pump the well a couple of times. This method may not give the expected results, and moreover, it will further complicate the situation. The second method consists in washing the well with a strong stream of water. This is done using a water compressor. The third way is a little dangerous. After purging by the compressor, you need to soon pour directly into the acid well (you can take the acid used in the car for batteries). After, leave everything for two days, then, after they expired, rinse the well for eight hours. With this method, in precautions, it is necessary to use protective clothing. Now on the Internet you can see tips in which it is recommended to clean the well by explosion. However, it must be remembered that explosive devices are inappropriate and dangerous, since then you will have to re -drill a well. And at the end, it should be said once again that the best and safest option is a challenge of a master who will quickly and without prejudice will do all the necessary work.