The installation of wooden windows with your own hands includes the activity at the same time simple, which does not require skills in construction and special tools, but also responsible, since it is necessary to ensure not only the accuracy of fixing the window, but also its tightness, in addition, preventing the distortion of the frame. Before starting the installation of wood windows with your own hands, you need to carefully check everything. In particular, it is necessary to check that the window block corresponds to the size, although there are tricks here. This trick is that the window block should be slightly smaller in size, only a few centimeters of the window opening. This is necessary so that the clearance is used to lay the insulation and to compensate for the skew of the window unit and the irregularities of the opening. Installation of wooden windows will occur only after the leveling of the window opening is completed along the horizontal line. The essence of the alignment is that a couple of bars are installed under the part of the window from below. Bars should be selected from the calculation of the size of the gap between the window block and the opening. After aligning the horizontal line, the alignment of vertically should be. This process is like the previously considered, but only in a plane of a vertical nature. After the alignment process, the windows should be fixed. The process of fixing the window is carried out: using a plain made of metal, through a window box. Fixing through a window box is the easiest way, it is it that provides for fixing the window through an anchor bolt. If the window was installed using metal plain, then this method is a little more complicated than the first. Its essence is to fix the window block to the window opening through metal plates. Despite the relative complexity of the second method, it has a number of advantages, for example, the type of window from the inside and outside remains the same, even better, the window does not change during the installation process. After fixing, it is necessary to fix the windows. For this process, it is necessary to use the mounting foam, as well as other materials. It is better not to try not to use foam for insulation, since it expands very much, thereby, it can harm the window. One of the most popular heater is Pacli, which tends to save heat perfectly and the process of insulation itself will not take a lot of time.